Six key capabilities.
The following are summaries of key data from the testing report. The values, conditions and phenomena in the results are derived from the reported TL26080414; Use of meaning to help understand indicators and not substitute for complete testing reports.
Tensile properties and crack resistance
18.91 MPa / 469%- Testing items
- tensile strength / elongation at break
- Indicator requirements
- ≥10 MPa / ≥300%
- Results
- 18.91 MPa / 469%, this conclusion corresponds
Meaning of application:A balance between intensity and dilation helps to adapt the coating to substrate changes.
Water impermeability
0.3 MPa · 120 min- Testing items
- Water impermeability
- Test conditions
- 0.3 MPa, continuous 120 min
- Results
- No water seepage, this conclusion is consistent
Meaning of application:Used to assess membrane containment and resistance.
Bond strength
3.88 MPa- Testing items
- Bond strength under the specified test conditions
- Indicator requirements
- ≥2.5 MPa or base damage
- Results
- 3.88 MPa, base material destruction, this conclusion is consistent
Meaning of application:The coatings are shown to be more adhesive to the test base.
Water resistance
23℃ · 14 d- Testing items
- Water resistance
- Test conditions
- 23℃, impregnated 14 d
- Results
- No cracks, no layers, no sticky hair, no bubbles, no cracks.
Meaning of application:For assessment of membrane stability in a continuous water environment.
Temperature bends
- 35℃ without crack- Testing items
- Temperature bends
- Indicator requirements
- - 35℃, no crack
- Results
- - 35℃, non-fissile, this conclusion meets
Meaning of application:It is used to assess flex and fracking performances in low-temperature conditions.
Salt resistant treatment
3% NaCl · 7 d- Testing items
- Integrated salt treatment
- Test conditions
- 3% NaCl solution, 7 d
- Results
- (b) Strength retention rate 97%; Length 491%; - 30℃ without crack
Meaning of application:To assess the performance of salt solutions after leaching; The project is not a salt spray test.
Test based on:T/CWA 204-2021 Waterproof Paints Report number:TL26080414 Sample number:T26070227
This page contains a summary of key data from the original test report, and complete test conditions, determination and statement of validity of the report are based on the original report.